J. Walia, S. Rashid, G. Killaire, F. Variola, A. Weck, P. Berini (2021) "Reconfigurable carbon quantum emitters from CO2 gas reduced via surface plasmons" Optica 8:708-709.
J. Walia, Y. Mei, G. Killaire, F. Variola, A. Weck, P. Berini (2020) "Enhanced hydroxylation and carbon dioxide uptake on nanotextured silver oxide" Applied Surface Science 520:146300.
J. Walia, J.-M. Guay, O. Krupin, F. Variola, P. Berini, A. Weck (2018) "Visible light driven plasmonic photochemistry on nano-textured silver" Physical Chemistry Chemical Physics 20:238-246.
M. Fee, S. Ntais, A. Weck, and E.A. Baranova (2014) "Electrochemical behavior of silver thin films interfaced with yttria-stabilized zirconia" Journal of Solid State Electrochemistry 18:2267-2277.
P. Dominic, F. Bourquard, S. Reynaud, A. Weck, J.-P. Colombier, F. Garrelie (2021) "On the Insignificant Role of the Oxidation Process on Ultrafast High-Spatial-Frequency LIPSS Formation on Tungsten" Nanomaterials 11:1069.
B.E.J. Lee, L.A. DiCecco, H. Exir, A. Weck, K.N. Sask, K. Grandfield (2021) "Simultaneous Visualization of Wet Cells and Nanostructured Biomaterials in SEM using Ionic Liquids" ChemBioChem 22:571-576.
H. Exir, A. Weck (2019) "Mechanism of superhydrophilic to superhydrophobic transition of femtosecond laser-induced periodic surface structures on titanium" Surface and Coatings Technology 378:124931.
J. Baxter, A. Cala' Lesina, J.-M. Guay, A. Weck, P. Berini, L. Ramunno (2019) "Plasmonic colours predicted by deep learning" Scientific Reports 9:8074.
J.-M. Guay, A. Cala Lesina, G. Killaire, P.G. Gordon, C. Hahn, S.T. Barry, L. Ramunno, P. Berini, A. Weck (2019) "Laser-written colours on silver: optical effect of alumina coating" Nanophotonics 8:807-822.
J.-M. Guay, J. Walia, G. Cote, D. Poitras, F. Variola, P. Berini, A. Weck (2019) "Effect of ps-laser repetition rate on colour rendition, nanoparticle morphology and surface chemistry on silver" Optical Materials Express 9:457-468.
J.-M. Guay, A. Cala Lesina, J. Baxter, G. Killaire, L. Ramunno, P. Berini, A. Weck (2018) "Topography tuning for plasmonic colour enhancement via picosecond laser bursts" Advanced Optical Materials 6:1800189.
J.-M. Guay, G. Killaire, P. Gordon, S. Barry, P. Berini, A. Weck (2018) "Passivation of Plasmonic Colors on Bulk Silver by Atomic Layer Deposition of Aluminium Oxide" Langmuir 441:1034-1042.
B.E.J. Lee, H. Exir, A. Weck, and K. Grandfield (2018) "Characterization and evaluation of femtosecond laser-induced sub-micron periodic structures generated on titanium to improve osseointegration of implants" Applied Surface Science 441:1034-1042.
J.-M. Guay, A. Cala Lesina, G. Cote, M. Charron, D. Poitras, L. Ramunno, P. Berini, A. Weck (2017) "Laser-induced plasmonic colours on metals" Nature Communications 8:16095.
T. Meunier, A.B. Villafranca, R. Bhardwaj, and A. Weck (2012) "Fabrication of microlens arrays in polycarbonate with nanojoule energy femtosecond laser pulses" Optics Letters 37:4266-4268.
V. Racine, M. Le Barh, G. Killaire, and A. Weck (2019) "Effect of polarization on ripple formation in deep femtosecond laser machined cavities" Journal of Materials Processing Technology 271:162-171.
T. Meunier and A. Weck (2012) "Interference rings formation inside cellulose from a back-reflected femtosecond laser pulse" Journal of Applied Physics 112:066101.
T. Meunier, A.B. Villafranca, R. Bhardwaj, and A. Weck (2012) "Mechanism for spherical dome and microvoid formation in polycarbonate using nanojoule femtosecond laser pulses" Optics Letters 37:3168-3170.
A. Weck, T. H. R. Crawford, H.K. Haugen, D.S. Wilkinson, S.J. Preston (2007) "Laser drilling of high aspect ratio holes in copper with femtosecond, picosecond, and nanosecond pulses" Applied Physics A-Materials Science & Processing 90:537-543.
A. Weck, T. H. R. Crawford, H.K. Haugen, D.S. Wilkinson, S.J. Preston (2007) "Ripple formation during deep hole drilling in copper with ultrashort laser pulses" Applied Physics A-Materials Science & Processing 89:1001-1003.
M. Pushkareva, F. Sket, J. Segurado, J. Llorca, M. Yandouzi, Arnaud Weck (2019) "Effect of Grain Orientation and Local Strains on Void Growth and Coalescence in Titanium" Materials Science and Engineering: A 760:258-266.
A. Junet, A. Messager, X. Boulnat, A. Weck, Elodie Boller, Lukas Helfen, J.-Y. Buffiere (2019) "Fabrication of artificial defects to study internal fatigue crack propagation in metals" Scripta Materialia 171:87-91.
M. Pushkareva, J. Adrien, E. Maire, J. Segurado, J. Llorca, A. Weck (2016) "Three-dimensional investigation of grain orientation effects on void growth in commercially pure titanium" Materials Science and Engineering: A 671:221-232.
E. Cantergiani, A. Fillon, B. Lawrence, X. Sauvage, M. Perez, C.P. Scott, and A. Weck (2016) "Tailoring the mechanical properties of steel sheets using FeC films and diffusion annealing" Materials Science and Engineering: A 657:291-298.
A. Fillon, X. Sauvage, B. Lawrence, C. Sinclair, M. Perez, A. Weck, E. Cantergiani, T. Epicier, and C. P. Scott (2015) "On the direct nucleation and growth of ferrite and cementite without austenite" Scripta Materialia 95:35-38.
J. Lachambre, J. Rethore, A. Weck, J.-Y. Buffiere (2015) "Extraction of stress intensity factors for 3D small fatigue cracks using digital volume correlation and X-ray tomography" International Journal of Fatigue 71:3-10.
A. Ketabchi, A. Weck, and F. Variola (2014) "Influence of oxidative nanopatterning and anodization on the fatigue resistance of commercially pure titanium and Ti-6Al-4V" Journal of Biomedical Materials Research Part B Applied Biomaterials 103:563-71.
Y. Alinaghian, M. Asadi, and A. Weck (2013) "Effect of pre-strain and work hardening rate on void growth and coalescence in AA5052" International Journal of Plasticity 53:193-205.
A. Chamanfar, L. Sarrat, M. Jahazi, M. Asadi, A. Weck, and A. Koul (2013) "Microstructural Characteristics of Forged and Heat Treated Inconel-718 Disks" Material and Design 52:791-800.
T. Meunier, S.G. Gopalakrishnan, and A. Weck (2013) "Plane stress local failure criterion for polycarbonate containing laser drilled microvoids" Polymer 54:1530-1537.
C. Scott, C. W. Sinclair, and A. Weck (2011) "Amorphous Fe(1-x)C(x) coatings as carbon reservoirs for diffusion strengthening of steel sheets"
A. Weck, P. Bisaillon, L. Nong, T. Meunier, H. Jin, M. Gallerneault (2011) "Mechanical properties of the aluminum roll-bond laminate AA5005-AA5083-AA5005" Materials Science and Engineering: A 528:6186-6193.
C. W. Sinclair, M. Perez, R. G. A. Veiga, and A. Weck (2010) "Molecular dynamics study of the ordering of carbon in highly supersaturated α-Fe" Physical Review B 81:224204.
A. Weck, D.S. Wilkinson, E. Maire, H. Toda (2008) "Visualization by x-ray tomography of void growth and coalescence leading to fracture in model materials" Acta Materialia 56:2919-2928.
A. Weck, J. Segurado, J. Llorca, D.S. Wilkinson, H. Boehm (2008) "Numerical simulations of void coalescence in model materials using a nonlocal ductile damage approximation" International Journal of Fracture 148:205-219.
A. Weck, D.S. Wilkinson (2008) "Experimental investigation of void coalescence in metallic sheets containing laser drilled holes" Acta Materialia 56:1774-1784.
A. Weck, D.S. Wilkinson, E. Maire (2008) "Observation of void nucleation growth and coalescence in a model metal matrix composite using x-ray tomography" Materials Science and Engineering A 488:435-445.
A. Weck, C. W. Sinclair, C. Scott, and C. Maunder (2012) "Supersaturated α-Iron in vapour deposited Fe-C thin films" Journal of Materials Science 47:6939-6947.
A. Weck, T. H. R. Crawford, A. Borowiec, D.S. Wilkinson, S.J. Preston (2007) "Femtosecond laser-based fabrication of a new model material to study fracture" Applied Physics A-Materials Science & Processing 86:55-61.
A. Weck, D.S. Wilkinson, E Maire, H. Toda (2006) "2D and 3D visualization of ductile fracture" Advanced Engineering Materials 8:469-472.
X. Duan, A. Weck, D. S. Wilkinson, D. R. Metzger (2006) "Failure Modes of Perforated Material Under Finite Deformation" Journal of Pressure Vessel Technology In Press.
C. Gonzales, J. LLorca, A. Weck (2006) "Toughness of fiber-reinforced titanium as a function of temperature: experimental results and micromechanical modeling" Acta Materialia 52:3929-3939.
