1. J. Baxter, A. Cala' Lesina, J.-M. Guay, A. Weck, P. Berini, L. Ramunno (2019)
    "Plasmonic colours predicted by deep learning"
    Scientific Reports Accepted


  2. J.-M. Guay, A. Cala Lesina, G. Killaire, P.G. Gordon, C. Hahn, S.T. Barry, L. Ramunno, P. Berini, A. Weck (2019)
    "Laser-written colours on silver: optical effect of alumina coating"
    Nanophotonics Accepted.


  3. J.-M. Guay, J. Walia, G. Cote, D. Poitras, F. Variola, P. Berini, A. Weck (2019)
    "Effect of ps-laser repetition rate on colour rendition, nanoparticle morphology and surface chemistry on silver"
    Optical Materials Express 9:457-468.


  4. J.-M. Guay, A. Cala Lesina, J. Baxter, G. Killaire, L. Ramunno, P. Berini, A. Weck (2018)
    "Topography tuning for plasmonic colour enhancement via picosecond laser bursts"
    Advanced Optical Materials Accepted.


  5. J.-M. Guay, G. Killaire, P. Gordon, S. Barry, P. Berini, A. Weck (2018)
    "Passivation of Plasmonic Colors on Bulk Silver by Atomic Layer Deposition of Aluminium Oxide"
    Langmuir 441:1034-1042.


  6. J. Walia, J.-M. Guay, O. Krupin, F. Variola, P. Berini, A. Weck (2018)
    "Visible light driven plasmonic photochemistry on nano-textured silver"
    Physical Chemistry Chemical Physics 20:238-246.


  7. J.-M. Guay, A. Cala Lesina, G. Cote, M. Charron, D. Poitras, L. Ramunno, P. Berini, A. Weck (2017)
    "Laser-induced plasmonic colours on metals"
    Nature Communications 8:16095.


  8. M. Fee, S. Ntais, A. Weck, and E.A. Baranova (2014)
    "Electrochemical behavior of silver thin films interfaced with yttria-stabilized zirconia"
    Journal of Solid State Electrochemistry 18:2267-2277.


  9. T. Meunier, A.B. Villafranca, R. Bhardwaj, and A. Weck (2012)
    "Fabrication of microlens arrays in polycarbonate with nanojoule energy femtosecond laser pulses"
    Optics Letters 37:4266-4268.


  1. V. Racine, M. Le Barh, G. Killaire, and A. Weck (2019)
    "Effect of polarization on ripple formation in deep femtosecond laser machined cavities"
    Journal of Materials Processing Technology Accepted.


  2. T. Meunier and A. Weck (2012)
    "Interference rings formation inside cellulose from a back-reflected femtosecond laser pulse"
    Journal of Applied Physics 112:066101.


  3. T. Meunier, A.B. Villafranca, R. Bhardwaj, and A. Weck (2012)
    "Mechanism for spherical dome and microvoid formation in polycarbonate using nanojoule femtosecond laser pulses"
    Optics Letters 37:3168-3170.


  4. A. Weck, T. H. R. Crawford, H.K. Haugen, D.S. Wilkinson, S.J. Preston (2007)
    "Laser drilling of high aspect ratio holes in copper with femtosecond, picosecond, and nanosecond pulses"
    Applied Physics A-Materials Science & Processing 90:537-543.


  5. A. Weck, T. H. R. Crawford, H.K. Haugen, D.S. Wilkinson, S.J. Preston (2007)
    "Ripple formation during deep hole drilling in copper with ultrashort laser pulses"
    Applied Physics A-Materials Science & Processing 89:1001-1003.


  1. A. Junet, A. Messager, X. Boulnat, A. Weck, Elodie Boller, Lukas Helfen, J.-Y. Buffiere (2019)
    "Fabrication of artificial defects to study internal fatigue crack propagation in metals"
    Scripta Materialia Accepted.


  2. M. Pushkareva, J. Adrien, E. Maire, J. Segurado, J. Llorca, A. Weck (2016)
    "Three-dimensional investigation of grain orientation effects on void growth in commercially pure titanium"
    Materials Science and Engineering: A 671:221-232.


  3. E. Cantergiani, A. Fillon, B. Lawrence, X. Sauvage, M. Perez, C.P. Scott, and A. Weck (2016)
    "Tailoring the mechanical properties of steel sheets using FeC films and diffusion annealing"
    Materials Science and Engineering: A 657:291-298.


  4. A. Fillon, X. Sauvage, B. Lawrence, C. Sinclair, M. Perez, A. Weck, E. Cantergiani, T. Epicier, and C. P. Scott (2015)
    "On the direct nucleation and growth of ferrite and cementite without austenite"
    Scripta Materialia 95:35-38.


  5. J. Lachambre, J. Rethore, A. Weck, J.-Y. Buffiere (2015)
    "Extraction of stress intensity factors for 3D small fatigue cracks using digital volume correlation and X-ray tomography"
    International Journal of Fatigue 71:3-10.


  6. A. Ketabchi, A. Weck, and F. Variola (2014)
    "Influence of oxidative nanopatterning and anodization on the fatigue resistance of commercially pure titanium and Ti-6Al-4V"
    Journal of Biomedical Materials Research Part B Applied Biomaterials 103:563-71.


  7. Y. Alinaghian, M. Asadi, and A. Weck (2013)
    "Effect of pre-strain and work hardening rate on void growth and coalescence in AA5052"
    International Journal of Plasticity 53:193-205.


  8. A. Chamanfar, L. Sarrat, M. Jahazi, M. Asadi, A. Weck, and A. Koul (2013)
    "Microstructural Characteristics of Forged and Heat Treated Inconel-718 Disks"
    Material and Design 52:791-800.


  9. T. Meunier, S.G. Gopalakrishnan, and A. Weck (2013)
    "Plane stress local failure criterion for polycarbonate containing laser drilled microvoids"
    Polymer 54:1530-1537.


  10. C. Scott, C. W. Sinclair, and A. Weck (2011)
    "Amorphous Fe(1-x)C(x) coatings as carbon reservoirs for diffusion strengthening of steel sheets"


    Scripta Materialia 65:763-766.

  11. A. Weck, P. Bisaillon, L. Nong, T. Meunier, H. Jin, M. Gallerneault (2011)
    "Mechanical properties of the aluminum roll-bond laminate AA5005-AA5083-AA5005"
    Materials Science and Engineering: A 528:6186-6193.


  12. C. W. Sinclair, M. Perez, R. G. A. Veiga, and A. Weck (2010)
    "Molecular dynamics study of the ordering of carbon in highly supersaturated α-Fe"
    Physical Review B 81:224204.


  13. A. Weck, D.S. Wilkinson, E. Maire, H. Toda (2008)
    "Visualization by x-ray tomography of void growth and coalescence leading to fracture in model materials"
    Acta Materialia 56:2919-2928.


  14. A. Weck, J. Segurado, J. Llorca, D.S. Wilkinson, H. Boehm (2008)
    "Numerical simulations of void coalescence in model materials using a nonlocal ductile damage approximation"
    International Journal of Fracture 148:205-219.


  15. A. Weck, D.S. Wilkinson, E. Maire (2008)
    "Observation of void nucleation growth and coalescence in a model metal matrix composite using x-ray tomography"
    Materials Science and Engineering A 488:435-445.


  16. A. Weck, C. W. Sinclair, C. Scott, and C. Maunder (2012)
    "Supersaturated α-Iron in vapour deposited Fe-C thin films"
    Journal of Materials Science 47:6939-6947.


  17. A. Weck, T. H. R. Crawford, A. Borowiec, D.S. Wilkinson, S.J. Preston (2007)
    "Femtosecond laser-based fabrication of a new model material to study fracture"
    Applied Physics A-Materials Science & Processing 86:55-61.


  18. A. Weck, D.S. Wilkinson, E Maire, H. Toda (2006)
    "2D and 3D visualization of ductile fracture"
    Advanced Engineering Materials 8:469-472.


  19. X. Duan, A. Weck, D. S. Wilkinson, D. R. Metzger (2006)
    "Failure Modes of Perforated Material Under Finite Deformation"
    Journal of Pressure Vessel Technology In Press.