Articles published or accepted in refereed journals

  1. M. Pushkareva, J. Adrien, E. Maire, J. Segurado, J. Llorca, A. Weck (2016)
    "Three-dimensional investigation of grain orientation effects on void growth in commercially pure titanium"
    Materials Science and Engineering: A 671:221-232.


  2. E. Cantergiani, A. Fillon, B. Lawrence, X. Sauvage, M. Perez, C.P. Scott, and A. Weck (2016)
    "Tailoring the mechanical properties of steel sheets using FeC films and diffusion annealing"
    Materials Science and Engineering: A 657:291-298.


  3. A. Fillon, X. Sauvage, B. Lawrence, C. Sinclair, M. Perez, A. Weck, E. Cantergiani, T. Epicier, and C. P. Scott (2015)
    "On the direct nucleation and growth of ferrite and cementite without austenite"
    Scripta Materialia 95:35-38.


  4. J. Lachambre, J. Rethore, A. Weck, J.-Y. Buffiere (2015)
    "Extraction of stress intensity factors for 3D small fatigue cracks using digital volume correlation and X-ray tomography"
    International Journal of Fatigue 71:3-10.


  5. M. Fee, S. Ntais, A. Weck, and E.A. Baranova (2014)
    "Electrochemical behavior of silver thin films interfaced with yttria-stabilized zirconia"
    Journal of Solid State Electrochemistry 18:2267-2277.


  6. A. Ketabchi, A. Weck, and F. Variola (2014)
    "Influence of oxidative nanopatterning and anodization on the fatigue resistance of commercially pure titanium and Ti-6Al-4V"
    Journal of Biomedical Materials Research Part B Applied Biomaterials 103:563-71.


  7. Y. Alinaghian, M. Asadi, and A. Weck (2013)
    "Effect of pre-strain and work hardening rate on void growth and coalescence in AA5052"
    International Journal of Plasticity 53:193-205.


  8. A. Chamanfar, L. Sarrat, M. Jahazi, M. Asadi, A. Weck and A. Koul (2013)
    "Microstructural Characteristics of Forged and Heat Treated Inconel-718 Disks"
    Material and Design 52:791-800.


  9. T. Meunier, S.G. Gopalakrishnan, and A. Weck (2013)
    "Plane stress local failure criterion for polycarbonate containing laser drilled microvoids"
    Polymer 54:1530-1537.


  10. T. Meunier, A.B. Villafranca, R. Bhardwaj, and A. Weck (2012)
    "Fabrication of microlens arrays in polycarbonate with nanojoule energy femtosecond laser pulses"
    Optics Letters 37:4266-4268.


  11. T. Meunier and A. Weck (2012)
    "Interference rings formation inside cellulose from a back-reflected femtosecond laser pulse"
    Journal of Applied Physics 112:066101.


  12. T. Meunier, A.B. Villafranca, R. Bhardwaj, and A. Weck (2012)
    "Mechanism for spherical dome and microvoid formation in polycarbonate using nanojoule femtosecond laser pulses"
    Optics Letters 37:3168-3170.


  13. A. Weck, C. W. Sinclair, C. Scott, and C. Maunder (2012)
    "Supersaturated α-Iron in vapour deposited Fe-C thin films"
    Journal of Materials Science 47:6939-6947.


  14. C. Scott, C. W. Sinclair, and A. Weck (2011)
    "Amorphous Fe(1-x)C(x) coatings as carbon reservoirs for diffusion strengthening of steel sheets"


    Scripta Materialia 65:763-766.

  15. A. Weck, P. Bisaillon, L. Nong, T. Meunier, H. Jin, M. Gallerneault (2011)
    "Mechanical properties of the aluminum roll-bond laminate AA5005-AA5083-AA5005"
    Materials Science and Engineering: A 528:6186-6193.


  16. C. W. Sinclair, M. Perez, R. G. A. Veiga, and A. Weck (2010)
    "Molecular dynamics study of the ordering of carbon in highly supersaturated α-Fe"
    Physical Review B 81:224204.


  17. A. Weck, D.S. Wilkinson, E. Maire, H. Toda (2008)
    "Visualization by x-ray tomography of void growth and coalescence leading to fracture in model materials"
    Acta Materialia 56:2919-2928.


  18. A. Weck, J. Segurado, J. Llorca, D.S. Wilkinson, H. Boehm (2008)
    "Numerical simulations of void coalescence in model materials using a nonlocal ductile damage approximation"
    International Journal of Fracture 148:205-219.


  19. A. Weck, D.S. Wilkinson (2008)
    "Experimental investigation of void coalescence in metallic sheets containing laser drilled holes"
    Acta Materialia 56:1774-1784.


  20. A. Weck, D.S. Wilkinson, E. Maire (2008)
    "Observation of void nucleation growth and coalescence in a model metal matrix composite using x-ray tomography"
    Materials Science and Engineering A 488:435-445.


  21. A. Weck, T. H. R. Crawford, H.K. Haugen, D.S. Wilkinson, S.J. Preston (2007)
    "Laser drilling of high aspect ratio holes in copper with femtosecond, picosecond, and nanosecond pulses"
    Applied Physics A-Materials Science & Processing 90:537-543.


  22. A. Weck, T. H. R. Crawford, H.K. Haugen, D.S. Wilkinson, S.J. Preston (2007)
    "Ripple formation during deep hole drilling in copper with ultrashort laser pulses"
    Applied Physics A-Materials Science & Processing 89:1001-1003.


  23. A. Weck, T. H. R. Crawford, A. Borowiec, D.S. Wilkinson, S.J. Preston (2007)
    "Femtosecond laser-based fabrication of a new model material to study fracture"
    Applied Physics A-Materials Science & Processing 86:55-61.


  24. A. Weck, D.S. Wilkinson, E Maire, H. Toda (2006)
    "2D and 3D visualization of ductile fracture"
    Advanced Engineering Materials 8:469-472.


  25. X. Duan, A. Weck, D. S. Wilkinson, D. R. Metzger (2006)
    "Failure Modes of Perforated Material Under Finite Deformation"
    Journal of Pressure Vessel Technology In Press.


  26. C. Gonzales, J. LLorca, A. Weck (2006)
    "Toughness of fiber-reinforced titanium as a function of temperature: experimental results and micromechanical modeling"
    Acta Materialia 52:3929-3939.



Conferences contributions

A. Weck, J. Segurado, D.S. Wilkinson, J. LLorca, H. Boehm (2008)
"Numerical simulations of void coalescence in model materials using a nonlocal ductile damage approximation"
IUTAM Symposium on Theoretical, Modelling and Computational Aspects of Inelastic Media, Cape Town, South Africa, January 14-18.

A. Weck, D.S. Wilkinson, T.H.R. Crawford, H.K. Haugen, J.S. Preston (2007)
"Femtosecond laser drilling of high aspect ratio holes in copper sheets"
9th Internation Conference on Laser Ablation (COLA), Tenerife, Spain, September 24-28.

A. Weck, T.H.R. Crawford, D.S. Wilkinson, H.K. Haugen, J.S. Preston, E. Maire, H. Toda (2007)
"Deep hole drilling in copper with ultrashort laser pulses"
"Visualization of ductile fracture in laser drilled model materials"
Canadian Materials Science Conference (CMSC), Hamilton, Canada, June 20-22

A. Weck, D.S. Wilkinson (2007)
"The application of Computed X-Ray Tomography in Materials Science"
Canadian Chemistry Conference, Winnipeg, Canada, May 26-30.

A. Weck, D.S. Wilkinson (2006)
"New Material Designs to Study Ductile Fracture"
Weatherly symposium, Toronto, Canada, September 28.

X. Duan, A. Weck, D. S. Wilkinson, D. R. Metzger (2006)
"Plastic limit analysis for perforated plates with triangular array of circular holes"
American Society of Mechanical Engineers, Pressure Vessels and Piping Division, Vancouver, British Columbia, Canada, July 23-27, Paper Number PVP2006-ICPVT11-93655.

A. Weck, D.S. Wilkinson (2006)
"New Model Materials For Ductile Fracture Studies"
European Conference of Fracture, Alexandroupolis, Greece, July 3-7.

X. Duan, A. Weck, D. S. Wilkinson, D. R. Metzger (2005)
"Plastic limit analysis of perforated material under finite deformation"
American Society of Mechanical Engineers, Pressure Vessels and Piping Division, Denver, USA, July 17-21, Paper Number PVP2005-71646.

A. Weck, D.S. Wilkinson (2005)
"Ductile Fracture Studies with SEM and X-Ray Computed Tomography"
Meeting of the Microscopical Society of Canada, McMaster University, Hamilton, Canada, May 18-20.


Ph.D. Thesis


Download my PhD thesis - "The role of coalescence on ductile fracture" (8.25MB)
Copyright ©2013 Arnaud Weck. All Rights Reserved